A3 is a self-polishing antifouling paint especially recommended for yachting, cruising and fishing boats, It is particularly recommended for boats remaining in the water all year long. It can be applied over most other antifouling paints on the market, though it is not suitable for aluminium hulls o..
A4 T.Speed is a hard matrix antifouling paint especially recommended for yachting, racing, fishing, fast power boats. Particularly recommended for boats going ashore many months per year. T.Speed means super smooth friction free surface and reduced turbulences to increase speed or to save fuel.
A4 T.Speed Fluorescent is fluorescent hard matrix anti-fouling especially recommended for keel and rudder of regatta-boats.This fluorescent paint is very helpful for coastguard to localise capsized boats. Some yacht class rules impose it to competitors. It helps for keel and rudder in..
AS Paint Stripper is recommended to remove enamels, varnishs, and non-slip Nautix grip. It€™s particularly adapted to strip antifouling, except those containing tin.
It does not attack gelcoat and does not contain neither acid nor base.
Nautix Blue epoxy filler is a light weight epoxy filler (density 0.6) 100% watertight, produced with high quality watertight raw materials. This epoxy filler is especially recommended for fairing application over and below the waterline over GRP, rigid woods or metals. It can also be use as a finish..
DA Thinner can be used with all Nautix antifoulings, Nautix Fill, and PC primer. This product is particularly recommended to ease application regarding antifoulings and to clean tools and remove splashes. It is also recommended to clean spots of tar and rust.
Nautix DE thinner/cleaner is suitable for all Nautix epoxy coatings. This product is particularly recommended to make easier application of products and to clean tools. This thinner can be used with following products: Primers PE, HPE and EPOXYGARD, U2 Undercoat, NX194 finishing paint
Nautix DECK GRIP is a non-skid fast-drying deck paint formulated for marine environment. Easy to apply and very resistant to abrasion and detergents, this product is recommended for application over deck and bilges.
Nautix DP thinner/cleaner is suitable for all Nautix 1 component primers and 2-pack finishing paint. This product is particularly recommended to make easier application of products and to clean tools. This thinner can be used with following products: Primers PO, IA, PA, P1 - NAUTIX GRIP non-skid pai..
Nautix EPOXYGARD is new generation high performance 2-pack epoxy primer recommended for hull protection, and paint adhesion, especially anti-foulings. Easy to apply, this primer is particularly adapted to substrates, requiring high protection, below or above the waterline. Its formula has been optim..
Nautix Watertight is a fast drying epoxy filler 100% watertight. Produced with high quality watertight micronized compounds, this filler is especially recommended to be applied above and below the waterline over fibreglass, rigid woods or metals. Nautix Watertight filler is also recommended to cure ..